Australian-owned, family-run business that manufacturers some of the best heavy-duty earthmoving attachments in the world.

Tiger Buckets & Attachments

Tiger Buckets & Attachments is a family owned business based in Minto, South West of Sydney. We manufacture buckets and attachments for a number of industries including the construction, quarry, mining, demolition, agricultural, waste and recycling industries within Australia.
At Tiger, we pride ourselves on the following values:

Committed

Committed to better understand our customers needs and improving their experience through transparent communication

Integrity

Integrity to always do the right thing and always deliver what we promise

Quality

Quality in everything we do, we do well

Buckets

Aggi Bucket

Tiger Aggi Buckets are designed and built to meet your specification. Having splayed outside edge adapters and teeth, trench jamming is prevented and the bucketshell and side walls are protected.

This design yields a huge improvement in efficiency and quality of trenching work. The unique dual radius shell allows the bucket to go through the digging cycle without the rear of the shell interfering or causing resistance with the trench floor.

  • Weight class from 1 tonne to 90 tonne
  • Manufactured to any width and depth as required
  • Various ground engaging tools available to meet your specification

Cribbing Bucket

Tiger Cribbing bucket is specially designed for excessive railroad requirements to efficiently clean under rails, Custom thumb design is available to match bucket for compatibility.

They also help you save money in trenching jobs as they decrease the amount of backfill material required by digging the narrowest trench possible.

  • Weight class from 1 tonne to 90 tonne
  • Specially designed for excessive railroad requirements
  • Custom thumb design available to match bucket for compatibility
  • Ideal for railway maintenance.
  • Long lip design for efficient under-rail cleaning.

GP Digging Bucket

Tiger GP Digging Bucket is designed for general digging and earthmoving purposes. Use in low-impact, easier digging materials such as common earth, sand and clay.

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Tapered bucket design by narrowing the width of the bucket’s heel, material falls out easier because there is less friction during dumping. This also prevents material from packing into the top of the bucket.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Formed Beam top box construction
  • Tapered bucket wall design
  • Manufactured to any width as required
  • Double radius design increases digging force less bucket drag against the ground resulting in more power at the teeth and easier bucket filling
  • Comes pre-drilled for optional side cutters
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications

Heavy Duty Digging Bucket

Tiger Heavy Duty Buckets are for use in compact/moderately abrasive materials such as earth/rock, earth mixed with sand and gravel, dense clay, sandy loam.

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Formed Beam top box construction
  • Tapered bucket wall design
  • Manufactured to any width as required
  • Double radius design increases digging force less bucket drag against the ground resulting in more power at the teeth and easier bucket filling
  • Comes pre-drilled for optional side cutters or wing shroud
  • Optional Hard-Facing available
  • Optional Heel shroud bucket protection
  • Optional choc block
  • Optional internal wear strips protection
  • Optional extra side plate protection
  • Various ground engaging tools available to meet your specifications

Rock Quarry Bucket

Tiger Quarry Buckets are for aggressive bucket loading in quarry applications with earth/rock soils containing a high percentage of loose rock, well-blasted rock or other loose abrasive materials.

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Formed Beamtop box construction
  • Tapered bucket wall design
  • Manufactured to any width as required
  • Double radius design increases digging force less bucket drag against the ground resulting in more power at the teeth and easier bucket filling
  • Comes with side cutters or wing shroud
  • Cutting Edge protection as standard
  • Heel shroud bucket protection
  • Choc block
  • Inner and outerwear strips protection
  • Extra side plate protection
  • Optional Hard-Facing available
  • Various ground engaging tools available to meet your specifications

Mud Bucket

Tiger mud buckets are light weight, supplied in wide sizes to increase capacity. They can be used for ditch clearing, bulk loading of top soil and other light materials. Also known as ditching bucket, batter bucket, & Trimming bucket.

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Formed Beam top box construction
  • Manufactured to any width as required
  • Double radius design increases digging force less bucket drag against the ground resulting in more power at the teeth and easier bucket filling
  • Comes with Reversible bolt-on cutting edge

Tilt Bucket

Tiger Tilt bucket designed specifically to reach those awkward spots with less repositioning of your excavator.Tiger tilt buckets allow for level grading on uneven terrain, provide a smooth tilting action and are designed to fit tightly when curled up. With a 45 degree tilt range on each side, Tigers tilt buckets give the right angle every time.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Manufactured to any width as required
  • Australian made cylinder
  • Tilting 45° left and right to tackle any slopes
  • Spill guard
  • Greaseable pivot point
  • Hardened bushes and pivot pin
  • Reversible bolt on edge as standard

Sieve Bucket

Tiger sieve bucket designed to effectively sift out rocks, brush or other large debris while leaving your backfill where it belongs. Reduce your load waste while improving the productivity and performance of your machine. Also known as sifting buckets, sorting buckets & screening buckets.

Constructed with high tensile 4140 bar and ribs (grid) to suit any material sorting operations.

Double radius design to minimize surface friction and maximize cycle time efficiency when loading and unloading the bucket.

Manufactured with the use of materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Formed Beam top box construction
  • Manufactured to any width as required
  • Double radius design increases digging force less bucket drag against the ground resulting in more power at the teeth and easier bucket filling
  • Reversible bolt on edge as standard
  • Optional GET can be fitted
  • Choice of grid sizing available

Trapezoidal Bucket

Tiger Trapezoidal buckets are special purpose buckets designed for excavating water channels, pipeline trenching and various open drains in a single pass.

These buckets are custom built to exact specifications based on the customer’s particular application. These buckets are available in many different angles, widths and capacities. They also come with or without teeth and bolt on edges and optional drainage holes

Manufactured with high strength quality materials including low alloy carbon steel and quench and tempered plate.

  • Weight class from 1 tonne to 90 tonne
  • Designed to meet industry standards
  • Manufactured to any width as required
  • Angle based on client’s requirements
  • Optional Reversible bolt on edge
  • Various ground engaging tools available to meet your specifications

Grabs

Mechanical Rake Grab

Tiger manufactures a complete line of top quality, extreme service Rake Grab for all excavator makes and models from 1 – 90 tonne.

Available with variations in the number of tynes and spacings.

Also available as MANUAL or HYDRAULIC

Applications:

Land clearing, demolition, waste recycling, scrap yards, crush and load garbage, wood waste, construction debris, brush, etc. Excellent for building demolition.

Fine tune your productivity by adjusting the lower jaw’s angle using the 3 hole position support bracket.

  • Custom sizes and widths available
  • Weld-on hardened steel tips for long life
  • Extra thick Bisalloy wear plate inside and outside face of the grab
  • Heavy duty pivot system, fitted with Hardened & ground steel bushings and lubricated grease pins to ensures long lasting performance
  • Solid boxed construction design for increased lateral strength and durability from 3t –60t
  • Optional Tiger quick release stiff arm bar to ensures quick, easy arm alignment and attachment from the cab without any heavy lifting (only available upwards from 12 tonne machines)
  • Geometrically balanced design
  • 3 hole position bracket

Mechanical Rock Grab

Tiger manufactures a complete line of top quality, extreme service Mechanical Rock / Demolition Grab for all excavator makes and models from 1 – 90 tonne.

Applications:

Land clearing, demolition, waste recycling, scrap yards, crush and load garbage, wood waste, construction debris, brush, etc. Excellent for building demolition.

Fine tune your productivity by adjusting the lower jaw’s angle using the 3 hole position support bracket.

  • Custom sizes and widths available under request 
  • 5 Fingers as standard, 7, 9 or 11 fingers available under request
  • Weld-on hardened steel tips for long life
  • Extra thick Bisalloy wear plate inside and outside face of the grab
  • Heavy duty pivot system, fitted with Hardened & ground steel bushings and lubricated grease pins to ensures long lasting performance
  • Solid boxed construction design for increased lateral strength and durability from 3t –60t
  • Optional Tiger quick release stiff arm bar to ensures quick, easy arm alignment and attachment from the cab without any heavy lifting (only available upwards from 12 tonne machines)
  • Geometrically balanced design

 

Mechanical Log Grab

Tiger manufactures a complete line of top quality Mechanical Log Rock Grab for excavator makes and models from 1 – 20 tonne.

Economically designed, and based on the Heavy Duty boxed mechanical rock grab. Narrower and lighter duty to keep weight and cost down. Great for light duty work and moving basic materials around, much more affordable than the Heavy Duty Boxed Rock Grab design.

Applications:

Land clearing, waste recycling, scrap yards, crush and load garbage, wood waste, moving light construction materials.

Fine tune your productivity by adjusting the lower jaw’s angle using the 3 hole position support bracket.

  • Custom sizes and widths available
  • Weld-on hardened steel tips for long life
  • Heavy duty pivot system, fitted with Hardened & ground steel bushings and lubricated grease pins to ensures long lasting performance
  • Optional Tiger quick release stiff arm bar to ensures quick, easy arm alignment and attachment from the cab without any heavy lifting (only available upwards from 12 tonne machines)
  • Geometrically balanced design

 

Hydraulic Grab

Tiger manufactures a complete line of top quality, extreme service Hydraulic Rock / Demolition Grab for all excavator makes and models from 1 – 90 tonne.

Applications:

Land clearing, demolition, waste recycling, scrap yards, crush and load garbage, wood waste, construction debris, brush, etc. Excellent for building demolition.

  • High quality Australian made hydraulic cylinders
  • Custom sizes and width available
  • Weld-on hardened steel tips for long life
  • Extra thick Bisalloy wear plate inside and outside face of the grab
  • Heavy duty pivot system, fitted with Hardened & ground steel bushings and lubricated grease pins to ensures long lasting performance
  • Solid boxed construction design for increased lateral strength and durability
  • Geometrically balanced design
  • Tiger hydraulic grapple can be used in either demolition (3 fingers facing the cabin) or rock picking (2 fingers facing the cabin) applications, and adds to the versatility of the excavator, as it provides grappling small, bulky or long and awkward objects.

 

STM offers new & used trucks, construction equipment, spare parts, servicing/repairs & an in-house finance brokerage.
Copyright © 2021. All rights reserved.

Quote Form

Enquire about Tiger Attachments.

Book a Test Drive

Fill out your details and we will arrange your test drive!